PDF
user guide
keypad FC21E
0,2 MB |
 |
Access control keypad with plastic wall mounting case
|
|
|
|
| Access
control keypad with plastic buttons and casing. It has an one relay
for door opener and similar devices. The keypad is also used
for the programming of the unit. The keypad will be deactivated
with increasing time intervals ( max.25 sec.) if a wrong code is
dialled. 8 different codes, each 2 to 6 digits long can be programmed.
The activation time of the relay can be setup between 1 to 99 seconds,
also a on/off cycle can be programmed. Two LEDs indicate the correct
or wrong code input or programmation. The FC21E is designed for
inhouse use only. |
Technical
data:
- Plastic
buttons and casing
- Wall
mounting, inhouse use
- One
relay
- Up
to 8 different codes, each 2 to 6 digits long, are programmable
- Relay
activating timer, programmable from 1 to 99 seconds
- LED
signalling
- Standby power consumption: 15 mA
- Max. power consumption: 70 mA
- Working temperature: 0° to 40° C
- Power
supply : 12 V AC/DC
- Dimensions:
77mm x 106mm x 41,5 ( w x h x d)
- CE
|
|
