PDF
user guide
keypad FC32P
0,4 MB |
 |
Stainless steel access control keypad
|
|
|
|
| The
FC32P is a vandalproofed keypad for the access control in outdoor
installations. The unit has two relays to drive door openers or
similar devices. The programming as well the access code input
is done using the keypad. If required the relays contacts can be
activated also without acces code input. Up to four codes, each
1 to 6 digit long can be programmed for each relay. The activation
time can be programmed between 1 to 99 seconds, also an on/off
cycle can be programmed. Wrong inputs are advised with optical
and acoustic warnings. If an wrong code is dialed the keypad will
be
blocked
with an increasing time of up to 25 seconds. |
Technical
data :
- Stainless
steel frontplate and buttons, vandalproofed
- For
flush mounting outdoor installations
- 2
relays
- up
to 4 different codes, each 1 to 6 digits long, for each relays
- Relay
activation time programmable between 1 and 99 seconds
- Acoustic
on optical signals
- Power
supply : 12 Vac/dc +/- 10%
- Stand by power consumption: 15 mA
- Max. power consumption: 100 mA
- Working temperature: -10° to +50° C
- Max.
load for relays contacts: 12 Vac 2A
- Dimension:
85mm x 110mm x 54 mm ( w x h x d)
- Protection degree: IP45, IK08
- CE
|
|
