|
 |
Stainless steel access control keypad
|
|
-
Stainless
steel access control keypad
-
- For
combination with Matrix Style doorstations
|
The FC52MAS
is a vandalproofed keypad for the access control in outdoor installations.
The unit has two relays to drive door openers or
similar devices. The programming as well the access code input
is done using the keypad. If required the relays contact can be
activated also without acces code input. Up to twelve codes, each
1 to 8 digit long can be programmed fro each relay. The activation
time can be programmed between 1 to 99 seconds, also an on/off
cycle can be setup. Wrong inputs are advised with optical and acoustic
warnings. If a wrong code is dialed the keypad will be blocked
with an increasing time of up to 25 seconds. The unit has been
designed to be installed in combination with doorstation of the
Matrix Style series. In combination with the use of flush or wall
mounting boxes
of this doorstation series also a standalone installation can be realized. |
Technical
data :
- Stainless
steel frontplate and buttons, vandalproofed
- For
the use with Matrix Style doorstations
- 2
relays
- up
to 12 different codes, each 1 to 8 digits long, for each relays
- Relay
activation time programmable between 1 and 99 seconds
- Acoustic
and optical signals
- Power
supply : 12 Vac/dc +/- 10%
- Stand-by
power consumption: 20 mA
- Maximal
power consumption: 100 mA
- Working temperature: -10° bis +50° C
- Max.
load for relays contacts: 12 Vac 2A
- Dimension:
115mm x 115mm x 45mm (b x h x t)
- Protection
degree: IP 45, IK 08
- CE
|
|