PDF
user guide
keypad FC42
0,4 MB |
 |
Stainless steel access control keypad for wall installation
|
|
|
-
Stainless
steel access control keypa
-
-
-
Vandalproofed
for outside use
|
| The
FC42 is a vandalproofed keypad for the access control in outdoor
installations. The unit has two relays to drive door openers or
similar devices. The programming as well the access code input
is done using the keypad. If required the relays contacts can be
activated also without acces code input. Up to twelve codes, each
1 to 8 digit long can be programmed for each relay. The activation
time can be programmed between 1 to 99 seconds, also an on/off
cycle can be setup. Wrong inputs are advised with optical and acoustic
warnings. If an wrong code is dialed the keypad will be blocked
with an increasing time of up to 25 seconds. The unit has been
design for wall mounted vandalproofed outside installations. |
Technical
data :
- Stainless
steel frontplate and buttons, vandalproofed
- For
wall mounted outside installations
- 2
relays
- up
to 12 different codes, each 1 to 8 digits long, for each relays
- Relay
activation time programmable between 1 and 99 seconds
- Acoustic
and optical signals
- Power
supply : 12 Vac/dc +/- 10%
- Stand-by
power consumption: 20 mA
- Maximal
power consumption: 100 mA
- Working temperature:
-10° bis +50° C
- Max.
load for relays contacts: 12 Vac 2A
- Dimension:
80mm x 125mm x 33 ( w x h x d)
- Protection
degree : IP 45, IK 08
- CE
|
|
