PDF
user guide
keypad FC 52P
0,3 MB |
 |
Aluminum access control keypad with stainless steel buttons
|
|
|
- Access
control keypad with stainless stell buttons and aluminium
frontplate
-
- For
combination with Mody doorstations
|
| The
FC52P is a keypad for the access control in outdoor installations.
The unit has two relays to drive door opener or similar devices.
The programming as well the access code input is done using the
keypad. If required the relays contact can be activated also without
acces code input. Up to four codes, each 1 to 6 digit long can
be programmed fro each relay. The activation time can be programmed
between 1 to 99 seconds, also an on/off cycle can be setup. Wrong
inputs are advised with optical and acoustic warnings. If a wrong
code is dialed the keypad will be blocked with an increasing time
of up to 25 seconds. The unit has been design to be installed in
combination with doorstation of the Mody series. In combination
with the use of flush or wall mounting boxes of this doorstation
series also a standalone installation can be realized. |
Technical
data :
- Stainless
steel buttons and aluminium frontplate
- For
the use with Mody doorstations
- 2
relays
- up
to 4 different codes, each 1 to 6 digits long, for each relays
- Relay
activation time programmable between 1 and 99 seconds
- Acoustic
on optical signals
- Power
supply : 12 Vac/dc +/- 10%
- Stand-by
power consumption: 15 mA
- Maximal
power consumption: 100 mA
- Working temperature:
-10° bis +50° C
- Max.
load for relays contacts: 12 Vac 2A
- Dimension:
124mm x 90mm x 45mm ( w x h x d)
- Protection
degree : IP 42
- CE
|
|
