|
 |
Aluminium access control keypad with stainless steel illuminated buttons
|
|
- Aluminium access
control keypad
- illuminated stainless steel buttons
- two relays
- for the integration with Profilo door stations
|
The FC52PL
is a keypad for the access control in outdoor installations. The
unit has two relays to drive door openers or
similar devices. The programming as well the access code input
is done using the keypad. If required the relays contact can be
activated also without acces code input. Up to twelve codes, each
1 to 8 digit long can be programmed for each relay. The activation
time can be programmed between 1 to 99 seconds, also an on/off
cycle can be programmed. Wrong inputs are advised with optical
and acoustic warnings. If an wrong code is dialed the keypad will
be
blocked
with an increasing time of up to 25 seconds. The unit has been
design to be installed in combination with doorstation of the Profilo
series. In combination with the use of flush or wall mounting boxes
of this doorstation series also a standalone installation can be realized. |
Technical
data :
- Aluminium
frontplate with stainless steel buttons
- Green LED illumination for each button
- For
the use with Profilo doorstations
- 2
relays
- up
to 12 different codes, each 1 to 8 digits long, for each relays
- Relay
activation time programmable between 1 and 99 seconds
- Acoustic
and optical signals
- Power
supply : 12 Vac/dc +/- 10%
- Stand-by
power consumption: 20 mA
- Maximal
power consumption: 100 mA
- Working temperature: -10° bis +50° C
- Max.
load for relays contacts: 12 Vac 2A
- Dimension:
110mm x 99mm x 45mm (b x h x t)
- Protection
degree: IP 42
- CE
|
|