|
|
New
for the download |
GSM500.3G
gateway
user guide
(1,3 MB)
|
VNDNET
client
application
(6,0 MB) |
E-Stant
SMS configuration tool
for all GSM500 gateways
(14,0 MB) |
|
|
UMTS
gateway with one FXS telephone line interface, battery backup
and serial data interface |
|
- For
UMTS networks at 900 and 2100 MHZ
-
One analogue telephone line interface for FXS terminals
- RS232/RS485
and CANBus serial data interface
-
Integrated battery backup
|
|
With
the GSM500.3G gateway it is possible to connect a analogue telephone
terminal, or a PBX, directly to the UMTS network to realize cost
effective routings using the mobile public network. Further to
the telephone line also a transparent data communication using
RS232, RS485 and CANBus serial interface is provided by the device.
Together with the emergency call system many different applications
can be planed, like the installation of mobile solutions on construction
sites or where the standard telephone network is not available.
Also inside high buildings where the installation of this device
in the machine room near the roof might be cheaper then running
cables up from the basement. Up to 9 ECII FLEX or Helpy emergency
call system units can be connected to one GSM500.3G gateway.
No programming is need at all for the installation. A mini SIM
card with the PIN code 0000 is enough. The unit will delete this
PIN and change it with a random generated one blocking this way
the abuse of the card. But alos SIM card without a PIN code can
be used. For installation with data connectivity the programming
is done easly using SMS. An innovative cloud based application
can provide transparente serial data connection just using the
internet. On the receiving side no other hardware is required
then a PC running the specific VNDNET client application.
The GSM500.3G gateway adapter is delivered with a dual band UMTS/GSM
antenna and a PSU. It is powered with a 230 Vac mains, or using
a 10 to 17 Vdc voltage. An emergency power supply with battery
backup is integrated in the unit. The battery is tested periodically
and an alarm is send using the emergency phone or an SMS if the
battery fails the test. |
GSM500.3G
gateway application example
|
Standard
features
- Transparent
data transmission in standard RS232, RS485 or CANBus
-
Compatible with software VNDNET PC client -ti, specifically
designed for data transmission management
-
Allows to send SMS via serial port RS232 and CANBus
-
Remote monitoring independently from proprietary protocols
-
Remote control, programming and alerts via SMS
-
Cost reduction and data transmission service via server cloud
for M2M services
- Incoming
text messages transmission towards devices wired in the DB9
connector (under RS232 standard)
-
High transmission speed
-
Low consumption
-
Easy installation by connectors and/or terminal blocks
-
Local programming via DTMF
-
Remote programming via SMS
-
Caller ID visualization
-
CLIP / CLIR
-
Roaming management feature
-
Remote control of battery level (notification via SMS or ECII
FLEX/Helpy)
-
Remote control of power failure (notification via SMS)
-
Remote control of UMTS signal strenght
-
Automatic converter of the dialed number
-
Programmable telephone line tension
-
Customizable reception and transmission levels
-
Customizable timeout before dialing
-
Foreign or national codes customization
-
Automatic reboot under prolonged UMTS signal absence
-
Remote reset
|
Technical
data
- DB9
connector for data transmission in standard RS232, RS485, CANBus
- Power
supply: from 10 to 17 Vdc
- Power
supply input: terminal block or jack for 230 Vac external adapter
- Back
up batteries: NiMH 650 mAh
- Batteries
duration: 8 h in stand by; 1 h in conversation
-
UMTS/GSM transmission: dual band
- LED
signalling UMTS signal strenght (green)
- LED
signalling operation status (red)
- LED
signalling line status / data transmission (white)
- LED
signalling power supply status (blue)
-
Telephone line output: terminal block or RJ-11 connector
- Balanced
telephone line
- Antenna
with metal base and extensin cable L= 2 m
- External
adapter: input 230 Vac 50 Hz; output 12 Vdc 1 A
-
Dimensions (without antenna): 140 x 96 x 28 mm
- Weight:
220 g
|
|